DUAL
69,95 €
Single
ab 99,95 €
Single + Welle
ab 129,95 €

DUAL

Dualseifenschneider

CNC- gefertigter Seifenschneider aus HD-PE Kunststoff mit verstellbarem Schiebeanschlag von 0 bis max. 4 cm. Größere Stücken als 4cm sind ohne Anschlag möglich.
Durch den im Set enthaltenen Edelstahlschaber sowie das Edelstahlwellenmesser, sind Glatt- und Wellenschnitte möglich. Auch im Wechsel, da beide Möglichkeiten eine separate Führung im Kunststoff haben. Der Abstand zwischen beiden Führungen beträgt 2,5cm.
Es können exakt gleiche Seifenstücke bis max 10x 9cm im Querschnitt und unbegrenzter Länge sehr geschnitten werden. Die Einschnitte im Boden ermöglichen das Durchschneiden sodaß keine Bruchecken entstehen.
Der komplette Cutter kann inklusive des Edelstahschabers zur Reinigung in den Geschirrspüler gegeben werden. Das Wellenmesser aufgrund des Holzgriffes bitte per Hand reinigen.

Alle metallischen Teile sind aus Edelstahl.

Maße und Gewicht:
L/ B/ H 25 x 12,4 x 10,2cm, 1,2kg
Verwendete Materialien:

HD-PE-Kunststoff,

Edelstahlschrauben,

Dual soap cutter

CNC-manufactured soap cutter made of HD-PE plastic with adjustable sliding stop from 0 to max. 4 cm. Larger pieces than 4cm are possible without stop.
Due to the stainless steel scraper included in the set as well as the stainless steel wave blade, smooth and wave cuts are possible. Also in alternation, because both possibilities have a separate guide in the plastic. The distance between both guides is 2.5cm.
Exactly equal soap pieces up to max 10x 9cm in cross section and unlimited length can be cut very. The incisions in the bottom allow cutting through so that no broken corners occur.
The complete cutter including the stainless steel scraper can be put in the dishwasher for cleaning. Please clean the serrated knife by hand because of the wooden handle.

All metal parts are made of stainless steel.

Dimensions and weight:
L/ W/ H 25 x 12.4 x 10.2cm, 1.2kg.

Materials used:
HD-PE plastic,
Stainless steel screws

DUAL

69,95 €

  • 1,6 kg
  • verfügbar
  • 1 Woche bis Versand / 1 week ready to dispatch1

Single

Single-Drahtseifenschneider

Handgefertigter Single Seifenschneider, (Drahtseifenschneider)  aus Birkensperrholz mit verstellbarem Schiebeanschlag von 0 bis max. 4 cm. Größere Stücken als 4cm sind ohne Anschlag (gefertigt aus PE- Kunststoff) möglich.
Erhältlich in schwarz oder gelb sowie als Links- bzw. Rechtshänder.
Durch die spannbare Stahlsaite und den feststellbaren Schiebeanschlag können exakt gleiche Seifenstücke bis max 10x 10cm in unbegrenzter Länge sehr glatt geschnitten werden. Der Einschnitt ermöglicht das Durchschneiden sodaß keine Bruchecken entstehen.
Das Kunststoffteil ist in einem Handgriff nach oben abnehmbar und auch spülmaschinenfest.

Verbaute Aderendhülsen verhindern ein Einarbeiten des Drahtes ins Holz.

Alle Oberflächen und Kanten des Holzes sind je nach gewählter Variante mit Kunststoff oder Hartwachsöl beschichtet oder versiegelt. Dadurch erhält der Seifenschneider eine sehr robuste, schmutzunempfindliche, Wasser abweisende, abriebfeste und griffsympathische Oberfläche. Leicht zu reinigen.

Alle metallischen Teile sind aus Edelstahl.

Dem Seifenschneider liegt eine Ersatzsaite (vernickelter Stahl) zum wechseln bei.

Dieser Schneider ist nicht für "Melt and Pour" geeignet!

Maße und Gewicht:
L/ B/ H 25 x 30 x 21cm, 2,3kg

Verwendete Materialien

Birkensperrholz, Edelstahlscharniere, Edelstahlschrauben, Edelstahlsaitenspanner,
Aderendhülsen,
Gitarrensaiten aus vernickeltem Stahl,

PE-Kunststoff

 

Single wire soap cutter

Handmade single soap cutter, (wire soap cutter) made of birch plywood with adjustable sliding stop from 0 to max. 4 cm. Larger pieces than 4cm are possible without stop (made of PE plastic).
Available in black or yellow as well as left- or right-handed.
Due to the tensionable steel string and the lockable sliding stop, exactly equal pieces of soap up to max 10x 10cm can be cut very smoothly in unlimited length. The incision allows cutting through so that no broken corners occur.
The plastic part can be removed upwards in one movement and is also dishwasher safe.

Built-in ferrules prevent the wire from working into the wood.

All surfaces and edges of the wood are coated or sealed with plastic or hard wax oil, depending on the variant selected. This gives the soap cutter a very robust, dirt-resistant, water-repellent, abrasion-resistant surface that is pleasant to the touch. Easy to clean.

All metallic parts are made of stainless steel.

The soap cutter comes with a spare string (nickel-plated steel) for changing.

This cutter is not suitable for "Melt and Pour"!

Dimensions and weight:
L/ W/ H 25 x 30 x 21cm, 2,3kg

Materials used

Birch plywood, stainless steel hinges, stainless steel screws, stainless steel string tensioners,
ferrules,
nickel-plated steel guitar strings,
PE plastic

Single

99,95 €

  • 2,3 kg
  • verfügbar
  • 1 Woche bis Versand / 1 week ready to dispatch1

Single + Welle

Single-Drahtseifenschneider inklusive Wellenschnitt

Handgefertigter Single Seifenschneider, (Drahtseifenschneider)  aus Birkensperrholz mit verstellbarem Schiebeanschlag von 0 bis max. 4 cm. Größere Stücken als 4cm sind ohne Anschlag (gefertigt aus PE- Kunststoff) möglich.
Erhältlich in schwarz oder gelb sowie als Links- bzw. Rechtshänder.
Durch die spannbare Stahlsaite und den feststellbaren Schiebeanschlag können exakt gleiche Seifenstücke bis max 10x 10cm in unbegrenzter Länge sehr glatt geschnitten werden. Der Einschnitt ermöglicht das Durchschneiden sodaß keine Bruchecken entstehen und ist auch die Führung für das enthaltene Wellenschnittmesser. Mit diesem können geführt durch die hohe Vorder- u. Rückwand Seifenstücke von max. 10x 9cm (B/ H ) mit dem Wellenschnittmesser geschnitten werden.
Durch die gemeinsam genutzte Nut von Draht und Wellenschnitt können z.B im Wechsel Glatt- u. Wellenschnitte gemacht werden.
Der Wellenschnitt kann auch getrennt zum Holzkorpus erfolgen (siehe Bild). Das Kunststoffteil ist in einem Handgriff nach oben abnehmbar und auch spülmaschinenfest.

Verbaute Aderendhülsen verhindern ein Einarbeiten des Drahtes ins Holz.

Alle Oberflächen und Kanten des Holzes sind je nach gewählter Variante mit Kunststoff oder Hartwchsöl beschichtet oder versiegelt. Dadurch erhält der Seifenschneider eine sehr robuste, schmutzunempfindliche, Wasser abweisende, abriebfeste und griffsympathische Oberfläche. Leicht zu reinigen.

Alle metallischen Teile sind aus Edelstahl.

Dem Seifenschneider liegt eine Ersatzsaite (vernickelter Stahl) zum wechseln bei.

Dieser Schneider ist nicht für "Melt and Pour" geeignet!

Maße und Gewicht:
L/ B/ H 25 x 30 x 21cm, 2,6kg
Verwendete Materialien:

Birkensperrholz, Edelstahlscharniere, Edelstahlschrauben, Edelstahlsaitenspanner,
Aderendhülsen,
Gitarrensaiten aus vernickeltem Stahl,

PE-Kunststoff

 

 

Single wire soap cutter including wave cut.

Handmade single soap cutter, (wire soap cutter) made of birch plywood with adjustable sliding stop from 0 to max. 4 cm. Larger pieces than 4cm are possible without stop (made of PE plastic).
Available in black or yellow as well as left- or right-handed.
Due to the tensionable steel string and the lockable sliding stop, exactly equal pieces of soap up to max 10x 10cm can be cut very smoothly in unlimited length. The cut enables the cutting through so that no broken corners arise and is also the guide for the included wave cutting knife. With this, guided by the high front and rear wall soap pieces of max. 10x 9cm (W/H) can be cut with the wave cutting knife.
Due to the shared groove of the wire and the wave cut, smooth and wave cuts can be made alternately.
The wave cut can also be made separately to the wooden body (see picture). The plastic part can be removed upwards in one movement and is also dishwasher safe.

Built-in wire end sleeves prevent the wire from working into the wood.

All surfaces and edges of the wood are coated or sealed with plastic or hard wax oil, depending on the chosen variant. This gives the soap cutter a very robust, dirt-resistant, water-repellent, abrasion-resistant surface that is pleasant to the touch. Easy to clean.

All metallic parts are made of stainless steel.

The soap cutter comes with a spare string (nickel-plated steel) for changing.

This cutter is not suitable for "Melt and Pour"!

Dimensions and weight:
L/ W/ H 25 x 30 x 21cm, 2.6kg.

Materials used:
Birch plywood, stainless steel hinges, stainless steel screws, stainless steel string tensioners,
ferrules,
nickel-plated steel guitar strings,
PE plastic

Single + Welle

129,95 €

  • 2,6 kg
  • verfügbar
  • 1 Woche bis Versand / 1 week ready to dispatch1

Ersatzsaiten Single

 

Standard Ersatzsaiten

 

Material: plated steel PL .017

 

Diese Saiten sind standardmäßig im Plattenschneider und in den Single- und Multidrahtseifenschneidern verbaut. Nicht für den neu verfügbaren Vertikalcutter geeignet!

Die Lieferung erfolgt, wie auf den Bildern zu sehen, lose verflochten in einer Tüte.

 

This is the wire that I use in all my  Single cutters, Multi cutters and Log splitters. Not for the new vertical cutter!!!

You'll them loose as pictured.

 

 

Ersatzsaiten standard

7,50 €

  • 0,01 kg
  • verfügbar
  • 1 Woche bis Versand / 1 week ready to dispatch1