Dieser Schneider ist nur bedingt, je nach Härte der Seife, für "Melt and Pour"
Soap bars with a maximum edge length of 11.5 cm can be inserted in the sliding carriage (for processing square soaps). On the other side, it is possible to
process round bars of soap without any dimensional limits.
The edges of the soap bars should be broken soon after production. The harder the soap becomes, the greater the risk that the corners of the soap will break off during processing. In this case, always work from both outer sides to the centre.
The pictures of the sample soaps were taken after one day. The soap was still almost too soft. Depending on the recipe, this can therefore lie for a good 2 - 3 days until the edges are cut.
The soap edge cutter can be cleaned under running water or by adding washing-up liquid.
Cleaning in the dishwasher is not possible!!!
This cutter is only conditionally suitable for "Melt and Pour", depending on the hardness of the soap!
Seifenkantenschneider = L: 23,2cm B: 16,2cm H: 15,6cm, 2,8 Kg
Edelstahlschiene und -schrauben,